TABpro 600
A modular operating table with a 450 mm longitudinal slide, a loading capacity of up to 600 kg and configuration-dependent leg adjustment.
- Loading capacity
- up to 600 kg
- Modular tabletop
- 6 sections
- Imaging option
- Carbon-fibre board
- Transport option
- Electric AutoDrive
TABpro 600 combines a modular six-section tabletop with removable and interchangeable sections for procedure-specific positioning. A 304 stainless-steel body and waterproof memory-foam mattress support routine cleaning.
The specified TABpro 600 configuration provides electric leg adjustment. Electric kidney-bridge adjustment, Bluetooth control, carbon-fibre components and Electric AutoDrive are available according to the selected configuration.
Select supports and accessories for the intended procedure. Optional carbon-fibre imaging boards extend the imaging area. The illustrated setup and supplied accessories depend on the ordered configuration.
- 01Modular positioningRemovable head, upper-back and leg sections support procedure-specific arrangements. Select the appropriate head support, leg plates and positioning accessories.
- 02Daily OR workflowDual-control operation, 304 stainless-steel construction and a waterproof memory-foam mattress support setup and routine cleaning.
- 03Imaging accessAn optional carbon-fibre imaging board extends imaging access. Board and traction options must be selected for the intended table configuration.
- 04Control and assistance optionsThe optional Bluetooth LCD controller stores up to 32 position presets. A foot switch and Electric AutoDrive are optional. Availability depends on model and configuration.
Configurations and options depend on the selected model and project.
- 01General surgical positioning
- 02Orthopaedic positioning with selected accessories
- 03Urology and gynaecology with selected accessories
- 04Shoulder, spinal and neurosurgical positioning with appropriate supports
- 05Head, arm and leg supports selected for the procedure
- 06Positioning pads, straps, side-rail clamps and mattresses
- 07Orthopaedic traction and carbon-fibre components, subject to model and mounting compatibility
- 08Carbon-fibre imaging board, optional
- 09Bluetooth LCD controller, electric components and AutoDrive, as configured
As published by the manufacturer. Configurations can vary by market; confirm with our team before ordering.
Request datasheet| Loading capacity | up to 600 kg |
|---|---|
| Tabletop length | 2150 mm |
| Tabletop width, excluding side rails | 570 mm |
| Head-plate width, excluding side rails | 550 mm |
| Minimum tabletop height, excluding pad | 600 mm, standard version |
| Height adjustment travel | 500 mm, standard version |
| Trendelenburg / reverse Trendelenburg | 30° / 30° |
| Lateral tilt, left / right | 20° / 20° |
| Head-plate adjustment | Up ≥60° / down ≥90° |
| Back-plate adjustment | Up 85° / down 35° |
| Leg-plate adjustment | Up 85° / down 110° electrically on the specified configuration; outward ≥90° |
| Kidney bridge | 130 mm electric elevation, optional |
| Reflex / flex | 110° / 230° |
| Longitudinal slide | 450 mm |
| Imaging length with optional carbon-fibre board | Up to 2170 mm |
| Optional Bluetooth LCD controller | Memory for up to 32 surgical-position presets |
| Electric AutoDrive | Optional |
Plays from youtube-nocookie.com. No connection to YouTube is made until you press play. Watch on YouTube ↗
DOWNLOADS
Product brochureAVAILABLE ON REQUEST
Let’s Talk About
Your Requirements.
Tell us about your department, your procedures and your constraints. Our team will recommend a configuration, or customize one for you.