HF generator touch

Electrosurgical unit (MAX Series)

Our MAX Series HF generator with touch screen has the functions of bloodless cutting, electrocauterization fuctions, electrocoagulation and high efficient bipolar electrocoagulation. It comes with automatic compensation function, memory setting and pad testing. All our devices can be used in different type of operations such as:

General surgery, Cardiac surgery, Gynaecology, Othopaedics, Neurosurgery, Microsurgery and more.

N

Flexibility and reliability

– Much more effiecient than low frequency, produces less heat,
not to mention sparkle, resulting in less burned tissue

 – Fast healing with excellent results

– Provides smooth cuts with optimal perfomance on adipose tissues.

– Plug & Play – automatic identification of instruments as soon it is connected

 

N

Safety and convenience

– The device provides safe and convenient device control to meet
all your surgical needs in an operation room.

-By pressing 2 buttons (or more) will shut down the power for
safety precautions.

N

REM system

– The device automatically monitors the attachment of the patient
plate to check adequate connection with the patient

-An alarm will sound and output power is stopped for safety

 

N

Saving mode

The MAX VI allows the doctor to safe different operation settings and load
them fast and easy if needed.

N

BIPOLAR CUT mode

-The „Bipolar cutting“ is a relatively new technique. It provides a very high safety level.
In contrast to the monopolar cutting the current flows only through a small part of the operated
body part. By placing two independently insulated electrodes at the surcical site, a thermal
effect takes place. As this method needs 20-30% less power then the monopolar cutting, the risk
of damaging the surrounding tissue, causing TUR syndroms or disturbing ECG devices is absolutely
minimized. This method is suitable for critical and precise surgeries and applications.

 

 

 

N

ENDO CUT feature

Electrosurgical Unit MAX VI with Endo cut mode High patient safety thanks to the Patient Control System T
he Control System ensures that no burns can be caused on the patient’s skin. The system automatically
adjusts to given tissue impedances; it is also able to recognize single and twin-pad neutral electrodes.
So if such a neutral electrode with dual contact surfaces has been connected, the system permanently
monitors the proper application of the electrode. Whenever the electrode happens to be in insufficient contact
with the patient’s skin, the user is alerted…

N

Various cutting, coagulation and bipolar modes

– The modalities required to perform an operation as functional cutting
(Pure Cut, Blend1, Blend2, Blend3), coagulation (Spray), bipolar coagulaution (Soft)
are available in optimized wave form of HF mode to achieve the desired surgical
effect. 

N

Pure cutting and powerful coag

– The device offers the performance of smooth and powerful coagulation according
to your surgical needs with pure cutting abscene of spark and carbonization that
exists in other electrosurgical devices.

N

Spray coagulation function

– The spray coagulation function enables the device to provide a faster coagulation and
stable clinical results can be achieved.
The operation time is much shorter with hemostatis and coagulation.

N

Risk of neuromuscular stimulation and damage to tissue is minimized from improved performanceat lower power settings.

N

Audible and visual alarms, including REM system for patient and user safety

N

Operation of cutting, coagulation and bipolar coagulation can be distinctively recognized by soundand indication lamp to distinguish an operation type

N

Easy operation, cost effective system, offering variety of choices of modes for most applications

N

Last operating condition can be recalled when turned back on

N

The input power frequency 50Hz/60Hz can be adjusted